CloudLabBox
Try the free demo

JNCIP-ENT lab 19 of 19

Capstone a new depot

Open a new depot from an empty configuration: OSPF, BGP to an ISP, 802.1X on the access port, a multicast stream through IGMP snooping, and marked voice.

Run this lab

It needs Professional: its 6 nodes are set to 15 vCPU and 17,920 MB in total.

In your workspace: Shared, then JNCIP-ENT JN0-650 guided labs, then 19 - Capstone a new depot

Run it on Professional from £7.50 a day

The free demo can’t run it: it has 6 vCPU and 8 GB, and this lab’s nodes need 15 vCPU and 17,920 MB together. Every lab plan includes every guided lab.

Level
Advanced
Time
About 120 minutes
Nodes need
15 vCPU, 17,920 MB
Smallest plan
Professional

The scenario

Everything you've built in this course comes together here. Northmere is opening a depot. R2 and SW1 have just been racked, and every address is in place. You'll connect it to head office and the internet, control who can plug in, deliver the training stream, and protect voice on the way. There's less guidance in this lab, and every task ties to an earlier one.

DeviceInterfaceAddressRole
R1ge-0/0/0, lo010.0.12.1/30, 10.255.0.1/32Head office router, to R2
R1ge-0/0/1198.18.1.1/30To ISP at .2, AS 64501
R1ge-0/0/210.1.1.1/24Head office LAN, with H1 at .10
R2ge-0/0/0, lo010.0.12.2/30, 10.255.0.2/32Depot router
R2ge-0/0/110.2.2.1/24Depot LAN
SW1irb.1010.2.2.2/24Depot switch, default route to R2
H2eth010.2.2.20/24Depot PC on SW1 ge-0/0/1

H1 runs radiusd with alice/lab123 and secret lab123. H2 has dot1x and tosrecv, which you used before. Each host's console is a remote desktop.

The brief:

AreaRequirement
OSPFEverything in area 0, LANs and loopbacks passive. R1 originates a default into OSPF with a policy, from a static discard route
BGPAS 64500 on R1. Advertise only an aggregate 10.0.0.0/8 to the ISP, and tag ISP routes with community 64500:100
AccessH2's port on SW1 needs 802.1X, against H1
MulticastR1 is the RP, on lo0. H1 streams 239.1.1.1 to H2. SW1 snoops IGMP
CoSOn R1, classify UDP port 5060 from H1's LAN as expedited-forwarding, and mark it EF towards R2

What you’ll practise

  • Combine OSPF, BGP, 802.1X, multicast and CoS in one network
  • Plan the order of the work
  • Prove each requirement from the far end

The tasks

  1. Connect the depot with OSPF
  2. Connect to the ISP with BGP
  3. Close the depot port
  4. Deliver the stream
  5. Mark the voice traffic

The Lab Tasks pane has the scenario, these tasks, the checks to run, hints and the full solution.

Topology and devices

The network as it opens in EVE-NG, drawn from the lab’s own canvas, and the image each node runs.

Topology of Capstone a new depot6 nodes, 5 links. Every link is listed as text below the diagram.R1R2SW1ISPH1H2ge-0/0/1Gi0/0ge-0/0/1ge-0/0/0ge-0/0/1eth0ge-0/0/2eth0ge-0/0/0ge-0/0/0
6 nodes, with the interface names each link uses. On a narrow screen, scroll the diagram sideways.
Every link, as text
  • R1 ge-0/0/0 to R2 ge-0/0/0
  • R1 ge-0/0/1 to ISP Gi0/0
  • R1 ge-0/0/2 to H1 eth0
  • R2 ge-0/0/1 to SW1 ge-0/0/0
  • SW1 ge-0/0/1 to H2 eth0
Nodes in Capstone a new depot, with the image each runs and the vCPU and RAM it’s set to
NodeDeviceImage in Add NodeSet to
R1Juniper vJunos-routervjunosrouter-24.2R1-S2.54 vCPU, 5,120 MB
R2Juniper vJunos-routervjunosrouter-24.2R1-S2.54 vCPU, 5,120 MB
SW1Juniper vJunos-switchvjunosswitch-23.4R2-S2.14 vCPU, 5,120 MB
ISPCisco IOSvvios-adventerprisek9-m.spa.159-3.m91 vCPU, 512 MB
H1EVE-NG GUI server (Docker)eve-gui-server:latest1 vCPU, 1,024 MB
H2EVE-NG GUI server (Docker)eve-gui-server:latest1 vCPU, 1,024 MB

How to open this lab

  1. Sign in to your workspace at lab.cloudlabbox.com.

  2. In File Manager, open Shared, then the folder JNCIP-ENT JN0-650 guided labs.

  3. Open 19 - Capstone a new depot and start its nodes, then open Lab Tasks for the scenario and the steps.

The lab is read-only. You can start the nodes and configure the devices, but changes to the topology can’t be saved. To change it, rebuild it in your own folder.

More JNCIP-ENT labs

All JNCIP-ENT labs

Related labs in other courses

CloudLabBox is independent of Cisco and Juniper Networks. The lab follows exam topics and isn’t vendor training material; vendor names identify the exams and the images in the workspace.